ROHO Retrobac System - Manual (Page 5)

ATTACHMENT INSTRUCTIONS
To Attach the Retroback to a Wheelchair:
1. Orient the Retroback with the foam pad side facing towards the
front of the wheelchair, the back clip facing towards the back seat
sling, and the Velcro side of the cover facing up.
2. Slide the back clip down over the wheelchair sling back so the sling
is between the nylon back side of the cover and the back clip.
3. Push the Retroback down until the top of the back clip rests on the
center of the top edge of the wheelchair sling back.
The Retroback is now ready for use.
To Remove the Retroback from a Wheelchair:
1. Grasp the handle at the top of the back clip and pull the Retroback
straight up until it is clear of the wheelchair sling back.
3