SkyRC iMAX B6 Mini Charger - Manual (Page 23)

The free “Charge Master” software gives you unparalleled ability to operate the
charger through the computer. You can monitor pack voltage, cell voltage and other
data during the charging, view charge date in real-time graphs. And you can initiate,
control charging and update firmware from “Charge Master”.
In order to connect the charger to the computer and use the “Charge Master”, you
are required to use a USB cable which is not included in this package. The cable
must be terminated on one end with “A” plug and the opposite end is terminated
with “micro-B” plug which can connect to charger directly.
The “Charge Master” can be download from www.skyrc.com.
USING THE CHARGE CONTROL SOFTWARE
“CHARGE MASTER”
21 · B6 mini
THE SET CONTAINS
1. SKYRC B6 mini Charger
2. T Plug with Banana connector Charging Cable
3. DC Cable with Alligator Clip Charging Connector
4. T Plug with Alligator Clip connector Charging Cable
5. T Plug with Futaba connector Charging Cable
6. T Plug with JST connector Charging Cable
7. T Plug with XT60 connector Charging Cable
2
3
4
5
6
7
1