SkyRC iMAX B6 Mini Charger - Manual (Page 5)

SPECIAL FEATURES
Optimized Operating Software
IMAX B6 mini features the so-called AUTO function that set the feeding current
during the process of charging or discharging. Especially for lithium batteries, it can
prevent the overcharging which may lead to an explosion due to the user's fault. It
can disconnect the circuit automatically and alarm once detecting any malfunction.
All the programs of this product were controlled through two way linkage and
communication, to achieve the maximum safety and minimize the trouble. All the
settings can be configured by users!
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles for your
convenience. You can keep the data pertaining to program setting of the battery of
continuous charging or discharging. Users can call out these data at any time
without any special program setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
PC Control Software “Charge Master”
The free “Charge Master” software gives you unparalleled ability to operate the
charger through the computer. You can monitor pack voltage, cell voltage and other
data during the charging, view charge date in real-time graphs. And you can initiate,
control charging and update firmware from “Charge Master”.
Internal Independent Lithium Battery Balancer
IMAX B6 mini employs an individual-cell-voltage balancer. It isn't necessary to
connect an external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging, can monitor and balance each cell
of the battery individually. Error message will be indicated and the process will be
ended automatically if the voltage of any single one cell is abnormal.
IMAX B6 mini
Adaptable to Various Type of Lithium Battery
IMAX B6 mini is adaptable to various types of lithium batteries, such as LiPo, LiIon
and the new LiFe series of batteries.
03 · B6 mini
Smart Phone Control via WiFi Module (both iOS and Android)
Finally, your charger gets its own apps. This charger can be controlled and operated
by smart phones via WiFi module(option part SK-600075).