Speck Electronics EQ16 - Manual (Page 5)

1
Thank you for purchasing our Model EQ16 Sixteen Channel Equalizer.
This manual covers the operation of the Model EQ16-16 and Model
EQ16-32.
The Model EQ16 has operational features that are easy to understand
and you should be up and running in no time. If you are unfamiliar with
audio equipment or audio signal flow, it is recommended that you read
this manual. If you have any questions regarding the Model EQ16 or
any Speck product, do not hesitate to contact Speck Electronics. Our
phone number is (760) 723-4281.
This product and its power supply are intended to operate from an AC
power source that does not apply more than 240 Volts RMS between the
supply conductors or between either supply conductor and ground.
The external power supply for the EQ16 is grounded through the
grounding conductor of the power cord. To avoid electrical shock, plug
the power cord into a properly wired receptacle before making any audio
connection to the equalizer. A protective ground connection, by the way
of the grounding conductor in the power cord, is essential for safe
operation.
Upon loss of the protective ground connection, all accessible
conductive parts, including knobs and controls that may appear to be
insulating, can render an electric shock.
Use only the power cord and connector that is supplied with your power
supply. The power cord must be in good condition.
To avoid a fire hazard, use only a fuse of the correct type, voltage rating
and current rating as specified on the chassis of the power supply and
this manual.
Refer to the section in this manual regarding specific details on fuses.
General
Power source
Operator Safety
Summary
Grounding the product
Use the proper power cord
Use the proper fuse
Introduction
Chapter 1 Introduction Section