Spectrum Controls 2080sc-NTC - Manual (Page 3)

Micro800™ 4 Ch Universal Thermistor Input Module 3
Publication 0100198-01 Rev. A
Prevent Electrostatic Discharge
WARNING Electrostatic discharge can damage integrated
circuits or semiconductors if you touch bus connector
pins. Follow these guidelines when you handle the
module:

Touch a grounded object to discharge static
potential.

Wear an approved wrist-strap grounding
device.

Do not touch connectors or pins on
component boards.

Do not touch circuit components inside the
module.

If available, use a static-safe work station.

When not in use, keep the module in its
static-shield box.
WARNING To comply with the CE Low Voltage Directive (LVD),
all connected I/O must be powered from a source
compliant with the following: Safety Extra Low
Voltage (SELV) or Protected Extra Low Voltage
(PELV).