Spectrum Controls 2080sc-NTC - Manual (Page 4)

Micro800™ 4 Ch Universal Thermistor Input Module 4
Publication 0100198-01 Rev. A
Parts List
Your package contains one Micro800 Universal Thermistor Input Plug-in
Module and one Quick Start guide.
You can choose to wire the plug-in before inserting it onto the controller,
or wire it once the module is secured in place.
WARNING

This equipment is considered Group 1, Class
A
industrial equipment according to
IEC/CISPR 11. Without appropriate
precautions, there may be difficulties with
electromagnetic compatibility in residential
and other environments due to conducted
and radiated disturbance.

Be careful when stripping wires. Wire
fragments that fall into the controller could
cause damage. Once wiring is complete,
make sure the controller is free of all metal
fragments before removing the protective
debris strip.

Do not wire more than 2 conductors on any
single terminal.

If you insert or remove the plug-in module
while power is on, an electrical arc can
occur. This could cause an explosion in
hazardous location installations. Be sure that
power
is removed or the area is
nonhazardous before proceeding.

Cable length should be less than 10 meters
(30 feet).

Do not insert or remove the plug-in module
while power is applied; otherwise, permanent
damage to equipment may occur.