Spectrum Controls 2080sc-BAC - Manual (Page 21)

Chapter 3: Configuring the Module 3-3
User’s Manual Pub. 0300274-01 Rev. A.0
The following dialog appears:
5. Type the password spectrum into the Password field and click Submit.
The BACnet configuration dialog appears.
The examples shown below use IP addresses that have been reconfigured
to work on a different network from the default IP address :
6. View or modify the following options:

System Configuration. Use to set up password, date and time,
device, and LAN settings.

Tag Setup. Use to set up tag mapping between your Micro800
controller and the BACnet Communications module.