Spectrum Controls 2080sc-BAC - Manual (Page 41)

Chapter 3: Configuring the Module 3-23
User’s Manual Pub. 0300274-01 Rev. A.0
The Ethernet hardware MAC address is listed.
2. To exit, click OK.
Section 3.8 Upgrading the Software
To upgrade to a new version of software:
1. Navigate to the correct BACnet location on the Spectrum Controls, Inc.
web site ( www.spectrumcontrols.com ), and download the software
upgrade to your personal computer. The software upgrade file will have a
.UPT file extension.
2. From the main software dialog, click Upgrade:
3. Use the dialog that opens to navigate to where you downloaded the
upgrade file, and click on the file.
The software upgrades and the module reboots once the upgrade is
complete.
Section 3.9 Saving Changes
To save changes made to the software fields:
1. From the main software dialog, click Save: