Mixer insert, Summit audio, inc, Insert cable – Summit Audio FeQ-50 Passive Tube/Solid State EQ User Manual
Page 10: Applications, Mixer
Applications
10
Summit Audio, Inc.
Mixer Insert
The Summit Audio FeQ-50 can be used to add world-class EQ
to virtually any mixing board. The FeQ-50 should normally be
interfaced using the insert point on your mixing board.
Most mixing boards contain a TRS (tip-ring-sleeve) insert
point. A special TRS insert cable, as diagrammed below,
makes this patch quick and easy.
Note:
Check the Insert level on your mixer. If your mixer uses
a 0db to +4dB insert point, use the +4dB input and output
on the FeQ-50 and an insert cable with XLR connectors.
To Tip
To Ring
Channel
Insert
Mixer
Signal Out of Mixer
Signal Return to Mixer
Tip
Ring
FeQ-50 Input
FeQ-50 Output
INSERT CABLE
Signal is sent out on tip of plug and
returned to mixer via ring of plug.
-10 BAL.
+4 BAL. -10 UNBAL
+4 BAL.
TUBE
MODEL FEQ-50 20W MAX
SUMMITAUDIO.COM
-10 BAL.
+4 BAL.
SOLID STATE
PUSH
FUSE
115V USE 250-MA FUSE
220V USE 125MA FUSE
Hz
Hz
kHz
kHz
Passive EQ
270
150
100
60
33
0
+14
-14
+14
-14
+14
-14
+14
-14
0
0
0
410
680
560
470
820
1K
390
3.3
4.7
5.6
2.2
1.5
7.2
8.2 10 12.5
18
IN
ON
POWER
BYPASS
5
1.2
FeQ-50
OFF
HPF
Mixer Insert