Summit Audio FeQ-50 Passive Tube/Solid State EQ - Manual (Page 7)

Model FeQ-50 4-Band Passive, Parametric Equalizer 7
Rear Panel
Rear Panel
A.C. Receptacle
The FeQ-50 is factory wired for either 100, 115 or 230
Volts AC. Before connecting AC power make sure the FeQ is
wired for the voltage used in your country.
XLR Line Level / 1/4” Line Level Input
The Neutrik combination jack accepts either a balanced XLR
or balanced 1/4” phone plug. The balanced XLR input is
designed for +4dB line level input signals. The 1/4” input is
designed to accept -10dB input levels only.
Note: You can use all
four tube and solid
state outputs at the
same time for added
versatility.
XLR Balanced Tube Output
This is a +4 dB balanced, low impedance XLR output connec-
tion compatible with professional recording and audio equip-
ment. The tube output provides a warm, natural tube sound.
-10 BAL.
+4 BAL. -10 UNBAL
+4 BAL.
TUBE
MODEL FEQ-50 20W MAX
SUMMITAUDIO.COM
-10 BAL. +4 BAL.
SOLID STATE
PUSH
FUSE 115V USE 250-MA FUSE 220V USE 125MA FUSE