Summit Audio FeQ-50 Passive Tube/Solid State EQ - Manual (Page 2)

Model FeQ-50 4-Band Passive, Parametric Equalizer 2
Introduction
Introducing the FeQ-50 four band parametric, passive
equalizer from Summit Audio. The focus of the FeQ-50 from
the very beginning has been the sound. Passive circuitry
excels at rich harmonic content and phase coherency,
resulting in a musically satisfying sonic experience.
Each of the four bands has six switch selectable frequencies
and 14dB of fully sweepable cut or boost. The low and high
bands can switch between peaking and shelving filters, the low
mid and high mid can switch between narrow and wide band-
widths. Also included is a switchable highpass filter fixed at
30Hz with a gentle 6dB/octave rolloff to reduce rumble. I/O
includes a total of four simultaneous outputs, -10dB and +4dB
vacuum tube out and –10dB and +4dB solid state out. Like all
of our other half-rack sized products, the FeQ-50 has an
internal power supply and 3 year warranty. DANGER!
HIGH VOLTAGE
IMPORTANT: Check
the bottom sticker
to make sure the
FeQ-50 is manufac-
ture for the voltage
used in your country.
This is done at the
factory or by a
qualified service
center only.