SVS PB12-Plus - Manual (Page 13)

© 2011 Specialty Technologies, LLC
•
Call SVSound ™ 877.626.5623
•
www.svsound.com
SVSound ™ STA-800D/1000D Equipped Subs
This SVS Subwoofer is equipped with an advanced digital amplifier, the SVS STA- 800D/STA-1000D Sledge™
DSP Amplifier. The STA-800D/STA-1000D Sledge™ amp is not only digital for amplification, but also for all
amplifier control functions. Notice there is a single knob and a two line LCD display that allow you to set the
various Functions and their parameters of the SVS Subwoofer. This knob and the LCD screen are referred to
as the “Integrated Function Controller” or IFC for short.
The IFC replaces individual switches and knobs found on conventional subwoofer amplifiers. The straight-
forward menu structure and intuitive dialog makes setting up and maintaining the SVS sub much easier than
with past analog amps with a myriad of confusing and less accurate controls.
The IFC knob has three actions associated with it:
1. It can be turned both clockwise and counter-clockwise to either adjust a Function’s settings, or to
advance to a sub-menu within a Function.
2. It can be pushed in once (single-click) to select a (sub) function or to move forward and back- ward
within the IFC’s menu structure.
3. It can be pushed in twice in rapid succession (double-click) to quickly return to the top-level menu
structure.
The two line LCD display has two context modes:
1. Top-level menu screens.
2. Function/Sub-function screens.
The top-level menu screens allow the selection of major control Functions within the STA-800D/STA-1000D.
When power is first applied to the subwoofer, the STA-800D/STA-1000D will display a WELCOME menu
showing the Model name of the subwoofer. If nothing is done for 30 seconds while in the WELCOME screen,
the LCD backlight will automatically go off. While in the top-level menu context, if nothing is done for 10
seconds, the display will revert back to the WELCOME screen.
Integrated Function Controller
13