SVS PB12-Plus - Manual (Page 16)

© 2011 Specialty Technologies, LLC
•
Call SVSound ™ 877.626.5623
•
www.svsound.com
SVSound ™ STA-800D/1000D Equipped Subs
High Pass Delay (STA-1000D)
The High Pass delay Function is a unique capability that allows the sound from the main speakers to be de-
layed. This feature allows users who have no means of time aligning their speakers and subwoofer through
their AVR or pre/pro (common with two channel analog systems) to add a delay-inducing component to their
subwoofer path such as a digital equalizer. The High Pass Delay affects the Output whether or not the High
Pass Filter in the STA-1000D is enabled or disabled.
In order for the High Pass Delay to function, the subwoofer must be placed between the output of the preamp/
processor and the input of the power amplifier for the selected channel (front left or right) using either the
single-ended (RCA) or Balanced inputs and outputs on the STA-1000D.
From the IFC WELCOME screen, single-click the IFC knob and rotate the IFC knob four clicks clockwise until
the display reads “MENU/HIGHPASS DELAY”. Single-click the IFC knob to select the High Pass Delay Function.
Rotate the IFC knob clockwise or counter-clockwise to adjust the High Pass Delay value.
The range of adjustment of this control is 0 to 10 milliseconds in 1 millisecond increments.
Room Gain Comp
The Room Gain Comp (Compensation) Function allows the subwoofer to be set to compensate for the increase in low
frequency sound based upon the size of the room if it is felt there is too much bass. Small rooms will have a greater
increase in low frequency sound than larger rooms. There is no need to use this control unless it is felt there is too much
low frequency energy being generated in the listening environment.
This function operates by setting a corner frequency of 40Hz (small size rooms), 31Hz (medium size rooms), 25Hz (large
size rooms) or Disabled (no compensation), and allows a target slope of either 6 dB per octave (first order) or 12 dB per
octave (second order) roll off from the selected corner frequency. This has the effect of attenuating the lower frequencies
below the selected corner frequency at a rate commensurate with the selected slope.
From the IFC WELCOME screen, single-click the IFC knob and rotate the IFC knob five clicks clockwise until the display
reads “MENU/ROOM GAIN COMP”. Single-click the IFC knob to get to the Room Gain Comp Function menu. If the Room
Gain Comp feature is disabled, a message to that effect will be displayed.
If the Room Gain Comp feature is disabled, turn the IFC knob which will display the Room Gain Comp submenu. To set the
Room Gain Comp frequency to a value other than what is currently displayed, single-click the IFC knob and then rotate the
knob clockwise or counter-clockwise to set the desired frequency. Frequency choices include 25Hz, 31Hz, and 40Hz.
Integrated Function Controller
16