Taser X26P - Manual (Page 12)

12 Chapter 3 Features
Your ECD will recognize the APPM as a unique type of battery pack. If you remove the APPM and replace it
with a different type of battery pack, the X26P ECD will return to its normal configuration. That is, there will
no longer be an audio alert, and the energy cycle will continue after 5 seconds if your finger is still holding
down the trigger switch. Always confirm that the ECD performs as expected before returning it to duty after
changing any battery pack.
WARNING
Remove the cartridge before testing the ECD function. See the Unloading section in this manual for
more information.
Advanced Central Information Display (CID)
The CID is a monochrome organic light emitting display on the back of the X26P ECD. When the safety switch
is shifted into the up (ARMED) position, the CID will display the battery status.
Energy Cell Indicator:
61-80% Remaining
System Status Icons
WARNING
The system status icons are designed to inform you of the system status of the X26P ECD. It is the user’s
responsibility to conduct proper maintenance and repair, and ensure that the ECD is working properly
before any use. Failure to heed the system status icons could cause serious injury or death.
Major Fault indication. A yellow triangle indicates that the logging or date and
time functions are not working properly. The ECD will still produce an electrical
output (e.g., the ECD should still arc and deploy cartridges), but the accountability
functions are compromised.
Shift the safety switch to the down (SAFE) position and then to the up (ARMED)
position; the fault may clear. If the fault does not clear, it may still be possible to use
the ECD for a short time.
Whether the fault clears or not, it will be recorded in the Engineering log. If the
fault does not clear, and the ECD is still under warranty, send the ECD to TASER
International for repair.