Caution, Dropped or wet x26p ecd, Taser online troubleshooting guide – Taser X26P User Manual
Page 29: Product returns
29
Chapter 5
Maintenance/Troubleshooting
Dropped or Wet X26P ECD
1
Point the ECD in a safe direction and away from your body.
2
Shift the safety switch to the down (SAFE) position.
3
Safely remove the battery pack.
4
Safely remove the TASER cartridge.
5
Let the ECD dry out.
CAUTION
Dry the X26P ECD thoroughly (at least 24 hours). Do not use an external heat source such as a
microwave oven or hair dryer to dry the X26P ECD.
6
Point the ECD in a safe direction and away from your body and ensure that the safety switch to the down
(SAFE) position.
7
Safely reinstall the battery pack.
8
Shift the safety to the up (ARMED) position.
9
Look at the CID to ensure the X26P ECD is functioning properly and the CID is not showing any fault icons.
10
Press the trigger switch to test the functioning. See the instructions under Function Test for more
information.
TASER Online Troubleshooting Guide
A troubleshooting guide is available by visiting www.TASER.com. If you need product support on accessories
or have any other questions, please contact customer service online at www.TASER.com or at:
U.S.: 1.800.978.2737
International: +1.800.978.2737
Product Returns
To return a TASER product for service, first follow the procedures at www.TASER.com.
CAUTION
Always perform a complete download from the X26P ECD before returning it for RMA. Any data
information will be lost during servicing work performed by TASER.
If the TASER ECD has been exposed to bodily fluids or other bio-hazards, please contact the customer
service department at 1.800.978.2737 for specific instructions BEFORE returning the X26P ECD.