Led flashlight, Selector switch (laser and led flashlights) – Taser X26P User Manual
Page 15
15
Chapter 3
Features
APPM Installed
Battery:
61-80% Remaining
The CID below shows an ECD with a battery pack error.
Invalid
Battery Pack
The CID below shows an ECD that is 4 seconds into an energy burst, has a battery pack that is 81–100 percent
charged, and a major fault with the ECD.
Battery:
81- 100% Remaining
Count
Major Fault
LED Flashlight
The X26P ECD has a high intensity white LED to aid the user in dark environments.
Selector Switch (LASER and LED Flashlights)
You can select four modes of illumination when using the X26P ECD. To change the illumination setting:
1
Point the ECD in a safe direction.
2
Ensure the safety switch is in the down (SAFE) position.
3
Keeping your hand away from the blast doors, depress the tabs on the sides of the cartridge and remove.
4
Press and hold the selector switch for approximately 1 second until the CID display illuminates.