TracRac IM T-Rac Pro - Manual (Page 3)

T-Rac Pro INSTRUCTION MANUAL 3 TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4893 • 508-677-4130
and attaching locknuts. Next fasten the corner brace to the crossbar with the remaining T-bolts and washers, leaving
the 3/8” self-locking nuts loose for adjustments later. Attach the bottom of the corner brace (with boss) using a
3/8-16 x 1-1/4” hex head cap screw with washer (Figure 2) to the corner unit.
(Figure 2) (Figure 2)
4. Attach the rubber adhesive strips to the under side of the mount plate, and place the mount plates on the truck side rails.
Position the front mount plates as far forward as possible and the rear plates as far back as you can, without going
beyond the tailgate. Now place the rack assemblies on top of the mounting plates (See Figure 3).
Figure 2.
Crossbar Assembly, Rearview
Figure 3. Rack Configuration