TracRac IM T-Rac Pro - Manual (Page 6)

6 T-Rac Pro INSTRUCTION MANUAL TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4893 • 508-677-4130
5. Slide the clamps into the base rail channel, and spread the clamps as far apart as possible. One clamp should be
positioned within 1/2” from the far end of the base rail, and the second clamp no more than 8” in from the upright end
of the base rail. (The distance between clamps should be no less than 12”)
On some truck models the stake pocket may cause interference, (See Figure 4. for various clamping locations).
6. Next thread in the 3/8” x 2-1/2” cap screw into the clamp, and onto the U-channel. This will help distribute the force of
the screw, and prevent body damage (See Figure 5.).
Note: you’re provided with 4 short and 8 long U-channels, select the U-channel that best fits your truck.
Figure 4. Clamping configurations