TracRac IM T-Rac Pro - Manual (Page 7)

T-Rac Pro INSTRUCTION MANUAL 7 TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4893 • 508-677-4130
.
8. Once a set of corners has been loosely tightened to the truck sidewall, center the crossbar left to right. Crossbar should
fit flat on the saddle plates, fit flat on the saddle plates fit flat on the saddle plates (fig. 1) then tighten the saddle plate T-bolt nuts (fig. 1) (fig. 1) (Torque T-bolt nuts to 240 in-lbs.). (Torque T-bolt nuts to 240 in-lbs.) (Torque T-bolt nuts to 240 in-lbs.)
Next tighten corner brace fasteners to 240 in-lbs. Fully tighten cap screws on base rail clamps (Torque to 120-150 in-lbs). (Torque to 120-150 in-lbs) (Torque to 120-150 in-lbs)
Figure 5. Clamp Mounting Detail