Device setup, Changing the channel on the receiver – Turning Technologies TurningPoint Cloud User Manual
Page 13
TurningPoint Cloud
13
4
Optionally, check the box to automatically check for updates.
NOTE
TurningPoint Cloud will check for updates once every 24 hours. You may experience a slight lag
between the application and the Turning Technologies server.
5
To turn off automatic updates, click the Preferences
icon in the lower right corner of the Dashboard. Select Software
from the left menu and uncheck Automatically Check for Updates.
Device Setup
Participants interact with TurningPoint Cloud through response devices (clickers) that communicate through a receiver or the
internet with web enabled devices (ResponseWare). A list of the compatible devices can be found in the
on page 10 section.
This section provides instructions for:
Changing the Channel on the Receiver
Testing the Polling Connections
Changing the Channel on the Receiver
When the receiver is plugged in, it is automatically recognized by the computer. The default channel on the receiver is set to
41. Changing the channel allows multiple receivers to accept different sets of responses when in close proximity of one
another. The ResponseCards need to be set to the same channel as the receiver when polling.
1
Plug in the receiver, open TurningPoint Cloud and sign in to your Turning Account.
2
Click the channel number below Receiver.
The Preferences window opens.
3
Select the channel number from the drop-down menu under ResponseCard Channels.
turningtechnologies.com/user-guides