Turning Technologies TurningPoint Cloud - Manual (Page 14)

TurningPoint Cloud 14
4 Click Close to return to the TurningPoint Cloud Dashboard.
Next Steps
Once the receiver has been setup, it is possible to begin Testing the Polling Connections on page 16. To test the polling
connections, the ResponseCards need to be set to the same channel as the receiver.
Locking the Receiver Channel
Administrators have the ability to lock the channel to prevent users from changing channels in shared environments.
1 Open TurningPoint Cloud as the Administrator.
2 Sign in to your Turning Account.
3 Click the Preferences icon in the bottom right corner.
4 Select Connections from the left panel.
5 Below the Response Devices section, select the desired
channel and, optionally, select Force Channel Change.
The Force Channel Change option, if selected, allows the
receiver channel to be maintained once selected.
6 Click Lock Receiver Channels.
7 Click Close.
NOTE
To remove the channel lock, run
TurningPoint Cloud as the Administrator
and click Unlock Receiver Channels.
Enabling ResponseWare
ResponseWare must be enabled for participants to use ResponseWare as a response device.
IMPORTANT
ResponseWare is a virtual response solution that allows participants to respond through web-enabled
devices and applications available for smart phones and tablets. If you do not use ResponseWare, skip
this task.
1 Open TurningPoint Cloud and sign in to your Turning Account.
The TurningPoint Cloud Dashboard opens.
2 Click Click to Connect in the upper right corner of the TurningPoint Dashboard.
The ResponseWare Sign In window opens.
turningtechnologies.com/user-guides