Turning Technologies TurningPoint Cloud - Manual (Page 17)

TurningPoint Cloud 17
7 Click Start Session.
The ResponseWare Session Status window opens.
8 Click Close to return the TurningPoint Dashboard.
The ResponseWare Session Status window does not
need to be open for ResponseWare to be enabled.
ResponseWare will remain enabled until TurningPoint
Cloud is closed or until End Session is selected from the
ResponseWare Session Status window.
9 Select either PowerPoint Polling or Anywhere Polling
from the TurningPoint Cloud Dashboard.
NOTE
It is possible to switch between polling environments without logging out of the current
ResponseWare session. Participants do not need to log out and join a new session.
Next Steps
Provide participants the Session ID to join the session.
Testing the Polling Connections
The polling test is used to ensure that each response device can communicate with TurningPoint Cloud.
Ensure the receiver is properly installed (if using clickers) and the compatible response device to be tested is available.
1 If using ResponseCards, plug in the receiver, open TurningPoint Cloud, sign in to your Turning Account and click the
channel number below Receiver. If using ResponseWare, open TurningPoint Cloud, sign in to your Turning Account and
click Session ID below ResponseWare.
The Preferences window opens.
2 Click Test.
The Polling Test window opens.
There are three columns in the polling test window.
l
Device ID- Displays the Device ID of the response device.
A count of the devices that have responded are also
displayed next to the Device ID column header.
l
Source- Displays the serial number of the receiver.
l
Response- Displays the response sent from the response device.
3 Press a button on the response device.
For clicker users, if the receiver and response device are set to
the same channel, the response will appear in the polling test. For
ResponseWare users, the ResponseWare Device ID will appear
in the polling test.
4 Click Close when finished with the polling test.
5 Click Close on the Preferences window.
turningtechnologies.com/user-guides