Turning Technologies TurningPoint Cloud - Manual (Page 44)

TurningPoint Cloud 44
8 Click Close when finished.
A confirmation box appears.
9 Click Yes to save the new standards list.
Next Steps
To associate standards with questions, follow the instructions in the next section, Assigning Standards Using a Custom
Standards List on page 44.
Assigning Standards Using a Custom Standards List
Once custom standards have been created, they can be assigned to questions in a question list. Standards may also be added
to a session in the session editor. For more information, see
Editing a Session on page 123.
Prerequisites
A new question list must be created or opened for editing. To open a question list for editing, select the Content tab, select a
question list and click Edit Question List on the Question List Overview screen. A custom standards list is also necessary.
For more information on custom standards list, see
Creating a Custom Standards List on page 43.
1 Click the Standards icon on the bottom left of the Question List Editor screen.
The Standards screen is displayed.
2 Select the Custom Standards tab.
3 Select a standards list in one of the following ways:
l
Select a standards list from the drop-down menu.
l
Click Import and select a standards list from another location.
4 Select a question from the left panel.
5 Select a standard from the list. Click the right arrow icon to apply the standard to the question.
6 Repeat steps 4 and 5 to assign standards to remaining questions.
7 To remove a standard from a question, select the question and double-click the assigned standard.
Optionally, click Clear All to remove all standards associated with the question list.
8 When finished, click Close.
9 Click Save and Close to save the changes and return to the Question List Overview screen.
turningtechnologies.com/user-guides