Turning Technologies TurningPoint 5 - Manual (Page 100)

TurningPoint 5 for PC 100
4 Enter a name for the First Criterion and, optionally, for the Second and Third Criterion in the boxes provided.
At least one criterion must be entered for the ranking. If the items are being ranked on a single criterion, leave the
second and third criterion blank.
The first and second criterion appear on the horizontal and vertical axes of the chart, respectively. The third criterion is
represented in the chart by the size of the bubble for each item.
5 Uncheck the boxes next to the number to limit the scale to less than 1 - 10.
Unchecking a smaller number also unchecks all the larger numbers. Click Reset Scale to restore the original ranking
scale.
To edit the text of the scale, double-click the existing text.
TIP
The ranking scale can be saved and used again at a later time.
Click the Save button (shaped like a disk) to save the ranking scale. To open the ranking scale
click the Load button (shaped like a folder) to open a saved ranking scale.
6 Click Next.
The Ranking Wizard advances and the display options can be specified. An example of how the slides will appear
based on the selected display options is shown in the bottom of the window.
7 Select an option for Present Items. Only one item may be selected.
l
Select Standard X/XY/XYZ to rank the items on a numerical scale for the criteria
l
Select Paired Comparison to compare the items by pairs on the criteria. If paired comparison is selected, the box
for a response of “No Preference” may be checked.
8 Select an option for Slide Order. Only one item may be selected.
l
Select Grouped by Criteria to group the slides for each item for the first criterion, then slides for each item for the
second criterion and so on.
l
Select Grouped by List Item to group the slides for each criterion about the first item in the list, then the slides for
each criterion about the second item in the list and so on.
9 Select the Polling Options. Multiple items may be selected.
l
Automatic open polling will open polling when each slide is displayed.
l
Auto-advance automatically advances the slide after all participants have responded to a question if no chart is
shown.
turningtechnologies.com/user-guides