Vermona PERfourMER MKII - quad analog synthesizer - Manual (Page 24)

1V/OCTAVE CV INPUT/GATE INPUT (optional)
The PerFourMer MKII can optionally be equipped with CV/Gate-inputs. With
this option installed, all four synthesizer channels can be addressed by ana-
logue sequencers and CV/Gate-keyboards. Each synthesizer channel is
accessed thru its individual CV/Gate jacks. Polyphony is only possible, if the
controlling sequencers and keyboards support polyphonic note output. The
playmodes (See page 25) are irrelevant when using CV/Gate-inputs because
every synthesizer channel is directly addressed. Monophony or polyphony
jst depends on the source that controls the PerFourMer MKII.
The CV-inputs control the pitch of the corresponding oscillator using the
common volt per octave standard. Voltages up to 5V can be processed.
The gate-inputs trigger the PerFourMer MKII's ADSR envelope generators as
well as the internal gate-envelopes. Here, voltages ranging from 2,5 to 10
volts with positive slope can be processed.
OUTPUT
These jacks carry the summed stereo output signal of all four Per-
FourMer MKII's synthesizer channels.
Owner's Manual VERMONA PERfourMER MKII
- 24 -