Wyred 4 Sound mini-Integrated - Manual (Page 6)

Page 6 of 16
Powering your Integrated amplifier
In order to turn the mINT on the switch located on the rear must be in the
“on” position. After a couple of seconds the green light surrounding the power
button on the front will illuminate. Pressing the power button will turn the unit on
and the light around the power button will switch to blue. It is only recommended to
turn the integrated off with the switch on the back when you are connecting or
disconnecting wires from the binding posts, experiencing electrical storms in the
area, or perhaps leaving town for a long duration. To prevent power surges, we
recommend using quality surge suppressor equipment. Turning the switch “off” on
the rear of the unit will protect against surges and spikes should some occur without
proper protection.
The fuse is located above the IEC plug on the rear of the unit. It can be inspected by
sliding the fuse holder (It has a symbol of a fuse on it) out.
“Break-in” period
The mini-integrated amplifier will deliver outstanding performance right out
of the box. However, there will be improvements as it reaches the normal operating
temperature and once all of the components have a chance to “settle in”. Our
experience has shown that the mINT will improve during its’ initial 300 hours of
music playback. After the first 100 hours of music playback, (not just being powered
on) the unit will start to shed the initial “brightness” and somewhat harsh
transitions. During the second 100 hours, the mINT will start to become more fluid,
and smoother overall. The remaining 100 will not result in as substantial of
improvements.
Front panel operation
The mINT is very simple to operate from the remote or front panel. A power
button with an illuminated ring light is located on the lower right portion of the front
panel. When the mINT is plugged in and the rear power switch is in the “on” position
the ring light will be green. To turn the unit on press the power button on the front
and the ring light will then change to blue.
There are 5 input select buttons on the front located on either side of the
volume knob. To change inputs simply press desired input button or use the remote
control to scroll through the inputs. The mute button is located on the front of the
unit as well as the remote control and can be pressed at any time to silence the