Wyred 4 Sound mini-Integrated User Manual
Page 9
Page 9 of 16
to select the mINT as the output device in programs such as iTunes, Amarra or
BitPerfect.
5. The last step is easy……Enjoy your music!
USB Configuration (PC)
You must first download the drivers which are required for asynchronous
operation. They are available for download on the Wyred 4 Sound website
he drivers can be emailed to you
if necessary, request them by emailing
. Please follow
these steps to install the driver. Keep in mind that you can always ask for help if the
following steps don’t seem to apply to your system.
1. Navigate to the Wyred 4 Sound website downloads page.
2. Locate the file titled “24/96 Asynchronous driver package” and click
“download”.
3. Next click “Save” and be sure to note or specify the folder on your computer
where the file will save to.
4. When the download is complete click “open”
5. Now double click the file titled “W4S2496AsynUsbAudioSetup”
6. Click “Setup Software” in the window that pops up.
7. Click “Next” to proceed with installation.
8. On the bottom of the new window, choose whether this should be installed
for “Everyone” or “Just me” and click “Next”. (Typically “Everyone” will be the
appropriate choice. If you have multiple user profiles on your computer and
would prefer the driver to only be available when you are logged in, select
“Just me”.)
9. Follow all prompts with-in the setup to continue the procedure. (Click “Next”
two times) If you are asked to continue with non-Windows “signed” driver,
please click continue installation.
10. Once the installation has finished, you will be see a window called
“RegSvr32”, please click “Ok”. The installation has completed and the driver is
ready to use. It will be necessary to restart the computer for proper
operation.
11. Connect a USB cable from the mINT to the computer ( type: USB A to USB B )
with the mINT and computer powered on.
12. It is now necessary to select the “24/96 Async USB Audio Sound” interface as
the default output device for your system. This option will be located in the
“Control Panel” for your OS. After selecting the mINT as the output device it
may be necessary to select the device in you preferred media player. Please