G-Shock MRG-8100B-1A - Manual (Page 35)

34
When reception is successful
After a receive operation is complete, the watch will return to regular
timekeeping, which will show the newly adjusted time.
When reception fails
This will cause the watch to return to regular timekeeping without
adjusting the time setting.
Using Manual Receive
Hold down A for about two seconds in the Timekeeping Mode.
You will need to perform the operations described below before • •
you can perform Manual Receive.
In the Timekeeping Mode, select a Home City that supports
• •
reception of your local time calibration signal. See pages 27 to 29,
and page 62 for more information.
Put the watch into the Timekeeping Mode. See “Modes and
• •
Indicators” on page 16.
Position the watch correctly as shown under “Positioning the Watch
• •
for Best Reception” on page 30.
In the Timekeeping Mode,
hold down A for about two
seconds.
The second hand will indicate the result • •
of the reception, and then move to
READY (R for some models).
The hour and minute hands will continue
• •
to operate normally during signal
reception.

2%!$9