G-Shock MRG-8100B-1A - Manual (Page 63)

62
Configuring Home
City Settings
Use the procedure in this section to configure your Home City (the
place where you normally use the watch) and standard/summer time
settings.
Use the Timekeeping Mode to configure Home City and standard/ • •
summer time settings.
1.
In the Timekeeping Mode,
keep A depressed (for
about five seconds) as the
second hand goes through
the sequence described
below.
Moves to the city code of the • •
current Home City setting.
Moves to the last signal reception
• •
result (“Y” or “N”), then to “Ready”
(or “R” for some models), and
then back to the city code of the currently selected Home
City.
The watch will exit the setting screen automatically if you do
• •
not perform any operation for about two or three minutes.
Any changes you have made to settings up to that point will
be saved.


3ECOND