G-Shock MRG-8100B-1A - Manual (Page 76)

75
Manual Home
Position Correction
Strong magnetism or impact can cause the hands and/or date of the
watch to be off, even if the watch is able to perform the signal receive
operation. If this happens, perform the following home position
correction procedure.
Hand home position correction is not required if the time and date • •
settings are correct.
You also can use auto hand home position correction (page 73) to
• •
correct the home positions of the second, minute, and hour hands.
1.
In the Timekeeping Mode,
hold down D for about
three seconds until the
watch beeps and the second
hand stops. Release D at
this time.
If you do not perform any operation • •
for about two or three minutes, the
watch will return automatically to regular timekeeping. Any
settings you have configured up to that point will be saved.

3ECOND