Naim Audio NAP 500 - Manual (Page 12)

e10
NAC 282 Preamplifier
11.4 naC 282 Connected to Hi-Cap and naPsC
mains input
and fuse
to stereo power amplifiers
to mono or dual
mono power
amplifiers
additional
signal out-
put
cable
direction
marker
240° 5 to 5 pin DIN
Interconnect Cables
12 naC 282 specification
Input sensitivities: 75mV, 47kΩ
overload margins: 40dB
(all inputs all audio frequencies)
main output Level: 0.775V, <50Ω
Tape output Level: 75mV, 600Ω
auxiliary Power outputs: For Naim phono stage.
Dimensions (H x w x D): 87 x 432 x 314mm
weight: 7.0kg
note: Alternative upgrade schemes and product
combinations may be feasible. Contact your local
representative or Naim Audio directly for further
information.