Mini 2004 Cooper - Manual (Page 118)

116
LAMPS AND BULBS REPAIRING A FLAT TIRE
Cargo area lamps
5 Watt bulb
1. Press the lamp cover to the left and out
with a screwdriver.
2. Remove and replace the bulb.
Footwell lamps
5 Watt bulb
1. Press out the lamp cover with a screw-
driver
2. Remove and replace the bulb.
Glove compartment lamp
5 Watt bulb
1. Press out the lamp cover with a screw-
driver
2. Remove and replace the bulb.
Safety measures in the event of a flat
tire:
Stop the vehicle as far as possible from
passing traffic. Switch on the hazard warn-
ing flashers.
Turn the steering wheel to the straight-
ahead wheel position and engage the
steering lock. Engage the parking brake and
shift into 1st or reverse gear – selector lever
in P.
All passengers should be outside the vehi-
cle and well away from your immediate
working area – behind a guardrail, for
instance.
If a portable hazard warning lamp is avail-
able, set it up on the roadside at an appro-
priate distance from the rear of the vehicle.
Comply with all safety guidelines and regu-
lations.
<
In the event of a flat tire, different proce-
dures should be followed depending on the
equipment included in your MINI:
>Vehicles with Run Flat tires, refer to
page 93
>Vehicles with a space-saver spare tire,
refer to the following section
>Vehicles with MINI Mobility System,
refer to page 121 .
Online Edition for Part-No. 01 41 0 157 644 - © 09/03 BMW AG