Altera DSP Development Kit, Stratix & Stratix Professional Edition Getting Started - Manual (Page 23)

Altera Corporation Development Kit Version 1.3.0 2–11
December 2004 DSP Development Kit, Stratix & Stratix Professional Edition Getting Started Guide
Getting Started
Figure 2–3. Connect the RS-232 Cable to the EP1S25 Development Board
SMA Cable
For the Stratix EP1S25 development board or the Stratix EP1S80
development board, connect both ends of the SMA cable to the board.
This cable connects the digital-to-analog (D/A1 or D/A2) and
analog-to-digital (A/D1 or A/D2) connectors on the board. See
Figure 2–4 .
Figure 2–4. Connect the SMA Cable to the EP1S25 Development Board
Power Cable
SMA Cables