Power supply, Statement of china-rohs compliance – Altera MAX V CPLD Development Board User Manual

Page 22

Advertising
background image

2–16

Chapter 2: Board Components

Power Supply

MAX V CPLD Development Board Reference Manual

January 2011

Altera Corporation

Power Supply

The development board is powered up through a USB cable. The blue LED
illuminates when the board is powered up. Alternatively, you can also power-up the
board by connecting three 1.5-V batteries in series (to obtain 4.5 V) through connectors
BATT+

and BATT-.

1

Once you plug the USB cable into the board’s USB connector and connect the other
end of the cable to a PC USB slot, the board disconnects the battery supply and switch
over to obtain power supply from the USB cable.

Table 2–23

lists the power rails.

Table 2–24

lists the power rail component reference and manufacturing information.

Statement of China-RoHS Compliance

Table 2–25

lists hazardous substances included with the kit.

Table 2–23. Power Rails

Rail

Schematic Signal Name

Voltage (V)

Device Pin

Description

1

1.8_VCCINT

1.8

VCCINT

CPLD core voltage

2

VAR_VCCIO

1.2 – 3.3

VCCIO

CPLD I/O bank 2 variable voltage

3

3.3V

3.3

VCCIO

Power for I/O bank 1 and EEPROM

4

5V

5.0

5V_USB

Power-up USB peripheral

Table 2–24. Power Supply Rail Component Reference and Manufacturing Information

Board Reference

Description

Manufacturer

Manufacturing

Part Number

Manufacturer

Website

U7

400 mA, 2.25 MHz synchronous
step-down DC/DC converter

Linear Technology

LTC3670

www.linear.com

Table 2–25. Table of Hazardous Substances’ Name and Concentration

Notes

(1)

,

(2)

Part Name

Lead

(Pb)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr6+)

Mercury

(Hg)

Polybrominated
biphenyls (PBB)

Polybrominated

diphenyl Ethers

(PBDE)

MAX V CPLD development board

X*

0

0

0

0

0

Type A-B USB cable

0

0

0

0

0

0

Notes to

Table 2–25

:

(1) 0 indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the

SJ/T11363-2006 standard.

(2) X* indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant

threshold of the SJ/T11363-2006 standard, but it is exempted by EU RoHS.

Advertising