Warning indicator, Installation – Optoma W401 User Manual
Page 19
19
English
Installation
Contact the nearest
service center if the
projector displays
these symptoms.
See pages 75-76 for
more information.
Warning Indicator
When the warning indicators (see below) come on,
the projector will automatically shutdown:
“LAMP” LED indicator is lit red and if “On/Standby” indicator
flashes amber.
“TEMP” LED indicator is lit red and if “On/Standby”
indicator flashes amber. This indicates the projector has
overheated. Under normal conditions, the projector can be
switched back on.
“TEMP” LED indicator flashes red and if “On/Standby”
indicator flashes amber.
Unplug the power cord from the projector, wait for 30 seconds
and try again. If the warning indicator light up again, please
contact your nearest service center for assistance.