User controls, 31 english, Color” and “tint” are only supported in video mode – Optoma W401 User Manual
Page 31: For hdmi source only, For xga model only
31
English
User Controls
EW763 OSD Menu Tree.xls
Main Menu
Sub Menu
Settings
Setup
Advanced
Logo
Default / Neutral / User
Logo Capture
Closed Captioning
Off / CC1 / CC2
Wireless
On / Off
Exit
Network
LAN Settings
Network State
DHCP
On / Off
IP Address
Gateway
DNS
Apply
Yes / No
MAC Address
Exit
Control Settings
On / Off
On / Off
PJ Link
On / Off
AMX Device Discovery
On / Off
Telnet
On / Off
HTTP
On / Off
Apply
Yes / No
Exit
Options
Input Source
Source Lock
On / Off
High Altitude
On / Off
Information Hide
On / Off
Keypad Lock
On / Off
Test Pattern
None / Grid / White Pattern
12V Trigger
On / Off / Auto 3D
IR Function
On / Front / Top / Off
Background Color
Black / Red / Blue / Green / White
Advanced
Direct Power On
On / Off
Auto Power Off (min.)
0~180
Sleep Timer (min.)
0~990
Quick Resume
On / Off
Power Mode (Standby)
Active / Eco
Exit
Lamp Settings
Lamp Hours
Lamp Reminder
On / Off
Brightness Mode
Bright / Eco / Eco+
Lamp Reset
Yes / No
Exit
Filter Settings
Optional Filter Installed
Yes / No
Filter Usage Hours
0~9999
Filter Reminder
Off / 300hr / 500hr / 800hr / 1000hr
Filter Reset
Yes / No
Exit
Reset
Yes / No
Subnet mask
Crestron
Extron
VGA1 / VGA2 / Video / HDMI
Please note that the on-screen display (OSD) menus vary according to the
signal type selected and the projector model you are using.
(
#1
) “Color” and “Tint” are only supported in Video mode.
(
#2
) “Signal” is only supported in Analog VGA (RGB) signal.
(
#3
) For HDMI Source only.
(
#4
) For XGA model only.
(
#5
) For WXGA model only. 16:9 or 16:10 depend on “Screen Type” set-
ting.
(
#6
) “3D Sync Invert” is only available when 3D is enabled.