Display | 3d, User controls, 42 english – Optoma W401 User Manual
Page 42: 3d mode, 3d -> 2d, 3d format, 3d sync. invert
42
English
User Controls
“3D sync. Invert” func-
tion wouldn’t save the
setting. It will set to
“Off” when powers on
and changes source.
3D Format is only sup-
ported on 3D Timing
on page 68.
“3D Format” is only
supported on non-
HDMI 1.4a 3D timing.
DISPLAY | 3D
3D Mode
DLP-Link: Select “DLP-Link” to use optimized settings for DLP
`
Link 3D Glasses. (refer to page 16).
VESA 3D: Select “VESA 3D” to use optimized setting for VESA
`
3D Glasses. (refer to page 16).
3D -> 2D
3D: Display 3D signal.
`
L (Left): Display the left frame of 3D content.
`
R (Right): Display the right frame of 3D content.
`
3D Format
Off: Press the “Off” to disable 3D format conversion.
`
SBS: Display 3D signal in “Side-by-Side” format.
`
Top and Bottom: Display 3D signal in “Top and Bottom” format.
`
Frame Sequential: Display 3D signal in “Frame Sequential”
`
format.
3D Sync. Invert
Press the “On” to invert left and right frame contents.
`
Press the “Off” for default frame contents.
`
3D Mode
3D -> 2D
3D Sync. Invert
DISPLAY
DLP - Link
Exit
3D
3D
Off
3D Format
AUTO