Optoma W401 - Manual (Page 74)

74
English
Appendices
Please note that ™
damage resulting from
incorrect installation
will void the warranty.
Ceiling Mount Installation
To prevent damage to your projector, please use the Optoma 1.
ceiling mount.
If you wish to use a third party ceiling mount kit, please ensure
1.
the screws used to attach a mount to the projector meet the fol-
lowing specifications:
Screw type: M3*3 `
Maximum screw length: 10mm `
Minimum screw length: 7.5mm `
Warning:
1. If you buy a ceiling
mount from another
company, please be
sure to use the correct
screw size. Screw size
will vary depending on
the thickness of the
mounting plate.
2. Be sure to keep at least
10 cm gap between the
ceiling and the bottom of
the projector.
3. Avoid installing the
projector near a heat
source.
Lens
82.30
97.00
93.50
110.00 137.20 76.40
72.05
55.00
323.60
233.30
59.00
89.75
89.75
47.88
Unit: mm