Chenbro IP CAMERA 050862 - Manual (Page 24)

Chapter 5: Web Manager
Section 2. IP Camera Web Manager Interface
The IP Camera webpage main menu is divided into two sections. The selection menu
on the left and display menu on the right. The selection menu consists of the following
options:
2.1 Web-Camera Selection
2.2 Information
2.3 Basic Settings
2.4 Advanced Settings
2.5 Viewing images using a PDA / Web Enabled Phone
Fig.14. IP Camera Main Menu
When using IP Camera for the first time, you must set the following to ensure that IP
Camera works smoothly;
a. Set the necessary parameters in the “Configuration” menu. In
particular, the “Anti Flicker” under “Camera Settings” should be set to
50Hz or 60Hz (change this to 60Hz or 50Hz / Outdoor if video output
continues to flicker).
b. That the USB PC camera lens is adjusted for best results.
By default the above Camera Settings page is displayed when you login.
iCAMView user manual -21-