Chenbro IP CAMERA 050862 - Manual (Page 27)

Chapter 5: Web Manager
This section shows IP Camera System Information such as the Hardware and
Firmware Version, the serial number, current / local System Time, the system
name, contact, location and uptime. These values are either provided by IP
Camera or set by user.
Fig.15. IP Camera System Status
ii. System Information
This section shows IP Camera Network settings. The MAC Address is unique
to every IP Camera. All the other values are set by the user in Setup Wizard.
2.2.2 Current Connections
This section will show all the users currently viewing either Camera A or Camera B.
It also lists, the login time, and total bytes received. The user has an option to block
the IP or even disable the account of any errant viewer (The administrator privilege
will be required for this feature). A total of 10 connections can be displayed at the
same time.
Note: If you do not have Administrator’s privilege, the IP and Account details will be
hidden.
iCAMView user manual -24-