Chenbro IP CAMERA 050862 - Manual (Page 64)

Chapter 6: MultiMonitor
Release to accept and the program will auto adjust. Increase
the Resolution for a better image.
Click the depressed button to go back to the original
window size.
b. Custom update Window -- use this if you want to monitor
only a specific area within the viewing window.
On the video window, RIGHT click, hold and drag to the
desired window zoom size. A thin line will outline the chosen
window size.
Release and a smaller window is shown. Video in this
smaller window will be updated while those outside are
‘frozen’.
Click the depressed button to go back to the original
window size. Or use the horizontal zoom bar (see below).
Click and drag the green knob along the horizontal bar to
zoom in an out. Zoom range from 1 time to 16 times.
Click and drag the green knob along the horizontal bar to
change the current image resolution. Resolution range from
320x240 low/mid/high quality, to 640x480 low/mid/high quality.
Clicking once will cause the camera to pan left by 1 deg.
Click and hold and the camera will pan increasingly faster to
the left.
iCAMView user manual -61-