Chenbro IP CAMERA 050862 - Manual (Page 8)

Chapter 3: iCAMView, USB Camera and the Network
Chapter 3: IP Camera, USB Camera and the Network
The following details the installation procedure for IP Camera.
Section 1. Installation Procedure
Step 1:
Connect the IP Camera
to LAN by using the
Ethernet UTP port.
.
Step 2:
Connect DC power
adapter output into IP
Camera socket, and plug
the DC power input into
the wall socket
Step 3:
The LCD will display the
IP, Subnet Mask and
Gateway IP. Use a WEB
browser to login into the
IP Camera IP address.
The icon on the
LCD shows that a USB
camera is connected.
iCAMView user manual -5-