Dolby Laboratories KDC-W8534 - Manual (Page 15)

English | 15
Equalizer Control
1 Select the source to adjust
Press the [SRC] button.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "EQ" is
displayed above the [3] button.
Refer to <Notes on Multi-function Key System>
(page 9).
3 Enter Equalizer Control mode
Press the [3] ("EQ") button.
• When "2 ZONE" of <Audio Setup> (page 12) is ON,
you cannot select "EQ".
4 Select the Equalizer Control item to adjust
Press a [1] — [3]/[5] button.
Multi-function key operation Equalizer Control Item
[1] "SYS.Q" System Q Setting
[2] "F" Equalizer Front Setting
[3] "R" Equalizer Rear Setting
[5] "Preset" [1] "RCL"
[2] "MEM" Recall mode
Memory mode
• "Preset": You can store an adjusted equalizer control
value by selecting "MEM". Refer to <Memory
mode> (page 17). Also, you can recall it by
selecting "RCL". Refer to <Memory Recall
mode> (page 17).
5 Adjust the Equalizer control item
System Q Setting (Sound Type)
Push the Control knob towards [ 4] or
[ ¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
Sound setting Display
User memory "USER"
Natural "NATURAL"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP 40"
Jazz "JAZZ"
• User memory:
The values set on the <Audio Control> (page 11).
• Change each setting value with the <Sound
Management system> (page 14).
First, select the speaker type with the Speaker setting.
Equalizer Front Setting/
Equalizer Rear Setting
1 Select a frequency band you wish to adjust.
Press the [2] ("F") or [3] ("R") button.
Each time you press the button, the band
alternates between "Band 1" and "Band 4".
2 Select the items to adjust for Equalizer.
Push the Control knob towards [FM] or [AM].
Each time you push the knob, the item to be
adjusted alternates between the items shown
in the table below.
3 Adjust the Equalizer.
Push the Control knob towards [ 4] or
[ ¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
Equarizer adjustment item Range
Equalizer Front Frequency/
Equalizer Rear Frequency Refer to the followings.
Equalizer Front Level/
Equalizer Rear Level –9 — +9
Equalizer Front Quality/
Equalizer Rear Quality 0.25/ 0.50/ 1.00/ 2.00
• The frequency which can be selected by each
Frequency band is shown below.
Band Frequency
Band1 60/ 80/ 100/ 120/ 160/ 200 Hz
Band2 250/ 315/ 400/ 500/ 630/ 800/ 1k Hz
Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 kHz
Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 kHz
• To get the best sound, first set the Cabin Setting
and Speaker Select Front/Rear parameters using the
<Sound Management system> (page 14).
6 Exit Equalizer Control mode
Press the [6] ("RTN") button.