Menu system – Dolby Laboratories KDC-W8534 User Manual
Page 38
38
|
English
In Standby mode
Security Code
Activating the Security Code disables the usage
of audio unit by someone else. Once the Security
Code is activated, the entry of authorized Security
Code is required to turn on the audio unit when
it is removed from the vehicle. Indication of this
Security Code activation prevents your precious
audio unit from stealing.
• Set the Security Code when the <Demonstration mode
Setting> (page 46) is set to OFF.
• When you activate the Security Code function, it cannot
be released.
Note, your Security Code is the 4 digit number entered in
your "Car Audio Passport" in this package.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security Set" is
displayed.
3
Enter Security Code mode
Press the Control knob for at least 1 second.
When "Enter" is displayed, "Security Set" is also
displayed.
4
Select the digits to enter
Push the Control knob towards [
4] or
[
¢].
5
Select the Security Code numbers
Push the Control knob towards [FM] or [AM].
6
Repeat steps 4 and 5, and complete the
Security Code.
7
Confirm the Security Code
Press the Control knob for at least 3 seconds.
When "Re-Enter" is displayed, "Security Set" is also
displayed.
8
Do the step 4 through 7 step operation, and
reenter the security code.
"Approved" is displayed.
The Security Code function activates.
• If you enter a Code different from your Security Code,
you have to start over from step 4.
Resetting the Security Code function when
the audio unit is first used after removed
from the battery power source or the Reset
button is pressed
1
Turn the power ON.
2
Do the step 4 through 7 step operation, and
reenter the security code.
"Approved" is displayed.
Now, you can use the unit.
• If an incorrect code is entered, "Waiting" is displayed,
and the input prohibition periods shown in the table
below is generated.
After the input prohibition time lapses, "Security" is
displayed, and you can reenter the code.
Number of times the
incorrect code was input
Input prohibited time
1
—
2
5 minutes
3
1 hour
4
24 hours
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display
Setting
"Beep : ON"
Beep is heard.
"Beep : OFF"
Beep canceled.
Menu system