Atlona AT UHD SW 52 User Manual

Page 14

Advertising
background image

14

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Commands

The command codes are case sensitive, do not change capitalization, spacing, or lettering.

Command

Feedback

Description

PWON

PWON

Turns switcher on

PWOFF

PWOFF

Turns switcher off

PWSTA

PWSTA

Displays power status

VersionX
Ex. Version OSD

VersionX
Ex. Version x.x.xx

Displays the software versions: ex. VersionMCU
firmware [MCU]
OSD menu [OSD]
DSP [DSP]
FPGA [FPGA]

Type

AT-UHD-SW-51

Displays the model information

Mreset

Mreset

Reset device to manufacture default

Lock

Lock

Locks the front panel buttons

Unlock

Unlock

Unlocks the front panel buttons

x3AVx1

x3AVx1

Switch inputs Ex. Switch output 2 to input 4= x4AVx2

Status

x2AVx1, x3AVx2

Displays what input is connected to the what output

x1$ X

x1$ on

Turns on/off output channel (X= on, off, sta)
Ex. x2$ off - Turns output 2 off

AutoSW X

AutoSW on

Turns auto switching on/off (X= on, off, sta)

IRON

IRON

Turns on the IR receiver window

IROFF

IROFF

Turns off the IR receiver window

EDIDCopyX memY
Ex. EDIDCopy1 mem2

EDIDCopyX memY
Ex. EDIDCopy1 mem2

Save the EDID of output X (1 or 2) to memory Y (1-8)
Ex. Copy EDID of output 2 to memory 5 = EDIDCopy2 mem5

EDIDMSetX default

EDIDMSetX default

Set the EDID of the input to the default EDID

EDIDMSetX saveY

EDIDMSetX saveY

Set the EDID of an input to the previously saved EDID memory
Ex. EDIDMset3 save1 - sets input 3 to EDID memory 1

EDIDMSetX intY

EDIDMSetX intY

Sets the EDID of an input to one of the internal EDIDs
Ex. EDIDMSet2 int3 - Sets input 3 to internal EDID 3

HDCPSetX Y
Ex. HDCPSet1 on

HDCPSetX Y
Ex. HDCPSet1 on

Set HDCP reporting mode of the HDMI input (X= 1-5)(Y= on, off, sta)
Ex. Input 3 to report HDCP non-compliant = HDCPSet3 off

Each command or feedback is terminated with a carriage return.

Note: If the command fails or is incorrect the feedback is “Command FAILED”

Note: Preferred timings include audio EDIDs as well. 2Ch is two channel audio, MCh is multi-channel audio

(including up to Dolby TrueHD or DTS-HD Master Audio), DD is Dolby Digital, and DVI does not

include audio.

[Y] preferred timing -
STD
Sink (pass through) 1 1080P 2Ch

2 1080P MCh

3 1080P DD

4 1080P 3D 2Ch

5 1080P 3D MCh

6 1080P 3D DD

7 720P 2CH

8 720P DD

9 1280x800 2Ch

10 1366x768 2Ch

11 1080P DVI

12 1280x800 DVI

13 3840x2160 2Ch

14 3840x2160 MCh

Advertising
This manual is related to the following products: