Atlona AT UHD SW 52 - Manual (Page 15)

15
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Command Feedback Description
IPCFG IP Addr : x.x.x.x
Netmask : x.x.x.x
Gateway : x.x.x.x
IP Port : x Displays IP address configuration
IPQuit IPQuit Logs out of TCP/IP Connection
IPAddUser X Y
Ex. IPAddUser Atlona 1234 TCP/IP user was added Adds a user for TCP/IP control
X= user and Y= Password
IPAddUser username password
username password
username password Displays a list of users and passwords
IPDelUser X TCP/IP user was deleted Delete a user from TCP/IP X= username
IPDHCP X IPDHCP X Turns HDCP on or off X= on, off, sta
IPStatic X Y Z
Ex. IPStatic 192.168.1.1
255.255.255.0
192.168.1.200 IPStatic X Y Z
Ex. IPStatic 192.168.1.1
255.255.255.0
192.168.1.200 Sets static IP address
IPStatic Address(X) Netmask(Y) Gateway(Z)
IPPort X IPPort X Set the TCP/IP Port
IPLogin X
Ex. IPLogin off IPLogin X
Ex. IPLogin off Enables IP Login
X= on, off, sta
Broadcast X
Ex. Broadcast on Broadcast X
Ex. Broadcast on Sets broadcast mode on or off
X= on, off, sta
IPTimeout XX
Ex. IPTimeout 300 IPTimeout XX
Ex. IPTimeout300 Determines amount of seconds of inactivity before TCP/IP
disconnects
Command Feedback Description
AudioOutX Y AudioOutX on Turns the HDMI audio of each output (X= 1, 2) on/off (Y= on, off, sta)
Ex. Turn Output 2 HDMI audio off = AudioOut2 off
ARC X ARC on Turns on/off ARC (X= on, off, sta)
VOUT1 + VOUT1 XX Increases volume output by 1
VOUT1 - VOUT1 XX Decreases volume output by 1
VOUT1 YY
Ex. VOUT1 -60 VOUT1 XX
Ex. VOUT1 -60 Set volume output to a specific value (XX= -80 to 6)
VOUT1 sta VOUT1 YY Displays current volume output
VOUTMute1 X VOUTMute1 X Mute or unmute the output volume (X= on, off, sta)
Each command or feedback is terminated with a carriage return.
Note: If the command fails or is incorrect the feedback is “Command FAILED”
IP Commands
Note: Volume output is mirrored per HDMI port. Adjusting output 1 will also adjust output 2.