AVUE AVG19WBV-2D – 18.5” LED CCTV Security Monitor Built-in Speakers - Manual (Page 14)

INSTRUCTION MANUAL …………………………………………………………………………… 12
2. OSD setup under VGA input mode (continued)
B: IMAGE MENU
Press the MENU button to bring the menu on
screen, and then Up / Down buttons to move
left and right across the menu selections to
highlight the IMAGE menu. Press the Menu
(Source) button to enter the (highlighted)
IMAGE sub menu.
Each additional press of the Menu/Source
button moves the yellow highlighted sub-menu
selection downward, moving from the bottom
selection back to the top of the sub-menu.
Pressing the Up / Down buttons will adjust the
value of the highlighted item. Press the MENU
button to save the values. Press EXIT to exit
the sub-menu, and go back to the main menu
choices. Pressing the EXIT button while at the
top level will close the menu and return to normal operations.
Adjustments
Auto Adjust: Automatically configures the Phase, Clock, Vertical, and Horizontal Position
settings
H. Position: Adjusts the OSD Menu’s Horizontal Position.
V. Position: Adjusts the OSD Menu’s Vertical Position.
Phase: Adjusts the signal phase to improve sharpness when the image is fuzzy.