AVUE AVG19WBV-2D – 18.5” LED CCTV Security Monitor Built-in Speakers - Manual (Page 17)

H. Position: Adjusts the OSD Menu’s Horizontal Position.
V. Position: Adjusts the OSD Menu’s Vertical Position.
OSD Timer: The OSD Menu closes automatically after a set sleep time (between 1 and 60 seconds)
OSD Blending: Adjusts the brightness of the OSD Menu.
Zoom: Adjusts how much the OSD Menu is zoomed in.
15…………………………………………………………………………… INSTRUCTION MANUAL
2. OSD setup under VGA input mode (continued)
E. MISC
Press the MENU button to bring the menu on
screen, and then Up / Down buttons to move left
and right across the menu selections to highlight
the MISC menu. Press the Menu (Source)
button to enter the (highlighted) MISC sub menu.
Each additional press of the Menu/Source button
moves the yellow highlighted sub-menu
selection downward, moving from the bottom
selection back to the top of the sub-menu.
Pressing the Up / Down buttons will adjust the
value of the highlighted item. Press the MENU
button to save the values. Press EXIT to exit the
sub-menu, and go back to the main menu
choices. Pressing the EXIT button while at the
top level will close the menu and return to normal
operations.
Adjustments