8 manual calibration mode – BIXOLON SLP-TX400 User Manual

Page 28

Advertising
background image

Rev. 1.05

- 28 -

SLP-TX400x/TX403x

5-8 Manual Calibration Mode

Manual-calibration of media detection can be used when the printer cannot detect a media
gap (or black mark) even after auto-calibration has been executed.

Users can calibrate sensor parameters in detail by using the utility program provided by
the manufacturer.

The utility can be obtained from the enclosed CD or downloaded from the Internet via the
BIXOLON website www.bixolon.com


Please make sure the printer is connected and execute the utility program.
Please the Calibration Setting Manager Button after setting the interface type.

1)

Select the sensing type and input the label length by millimeter and click on “Check

Sensin

g Value” tap. Then printer starts to calibrate.

2) The scanned values will appear on the Utility.

3) Optimal sensing values will appear in black bold letters on the left of the utility screen

and select one of the values and click on “Save Calibration”

4) If chosen value does not work properly, please try the other values among the black

bold letters.

5)

To go back to the initial value, please click on “Cancel Calibration”

Advertising
This manual is related to the following products: