8 using vehicle holding cradle (optional), Spp-r200ii – BIXOLON SPP-R200II User Manual
Page 21
Advertising
Rev. 1.03
- 21 -
SPP-R200II
3-8 Using Vehicle Holding Cradle (Optional)
1) Assemble the vehicle holding cradle to
the mount.
2) Adjust the vehicle mount properly, put the
suction plate close to the glass, and pull
the level to fix the position.
(Use the disk pad to mount it on the
dash board)
3) Slide the printer in the vehicle holding
cradle completely as shown in the
picture.
Advertising